Audio System Rental - Yamaha MG124CX Analog Mixer

Yamaha MG124cx Analog Mixer

0 Review Add Your Review

AED 100.00

qty

Total Amount

AED 0.00

Details

Many real-world mixing applications only involve a few channels, so a small mixer is the obvious choice. But no matter how simple the setup, you'll always want first-rate audio quality and processing capability. The MG124cx is the ideal choice for live sound applications, offering sonic quality that will satisfy the most critical listener, surprising flexibility and ease-of-use, and some advanced features you normally wouldn't find in this type of compact mixer. So whether you need a compact main mixer, or a secondary utility mixer for a larger application, don't overlook these performance-packed models.

Inclusions:

Power cable

Note:

Price for single day hire.
Delivery charges may vary depending on the destination within Emirates.
Prices listed are exclusive of VAT and transaction fees.

Specifications Reviews

12-input, 4-bus design
4 channels of single-knob compression
Built-in DSP for high quality effects
3-band EQ on inputs
Frequency response: Stereo Out, Group OUT, EFFECT/AUX (AUX1, 2*), SEND, Monitor OUT, Rec Out: -3.0 — 1.0dB
Total Harmonic Distortion (THD + N) Stereo Out, +14dBu @ 20Hz-20kHz, Input Gain Control at minimum: 0.1%
Hum & Noise: CH Input 1-4 MIC, EIN (Equivalent Input Noise): Rs = 150Ω, Gain: maximum: -128dBu
Stereo Out & Group OUT, Stereo Out, Group Master fader at nominal level and all channels' ST and 1-2 switches off: -88dBu
EFFECT/AUX (AUX1, 2*) SEND, Master EFFECT/AUX (AUX1, 2) control at nominal level and all CH EFFECT/AUX (AUX1, 2) controls at minimum.: -81dBu
Stereo Out & Group OUT, Stereo, Group Master fader and one CH fader at nominal level: -64dBu
Stereo Out Residual Output Noise -98dB
Crosstalk (1kHz): Adjacent Input CH 1-4: -70dB; Input to Output Stereo L/R, CH 1-4, PAN: panned hard left or right: -70dB
Phantom Voltage MIC: + 48V
Input HPF: CH 1-7/8, 80Hz, 12dB/oct
Input equalization CH 1-7/8 HIGH: 10kHz (shelving), MID: 2.5kHz (peaking), LOW: 100Hz (shelving); CH 9/10-11/12 HIGH: 10kHz (shelving), LOW: 100Hz (shelving)
PEAK Indicator: Red LED turns on when post EQ signal (either post MIC HA or post EQ signal for CH 5/6, 7/8) reaches -3dB below clipping (+17dBu).
Power Supply Adaptor PA-20: AC 35 VCT, 0.94 A, Cable Length = 3.6 m
Power Consumption: 30 W
Dimensions (WxHxD): 19.5" x 18.5" x 7.3" (346.2mm x 86.1mm x 436.6mm)
Weight: 16.5lb. (3.2kg)